1. Air consumption: 0.13 cubic metres/minute
2. Spray particles: 5-7 microns
3. Air supply pressure: 3-4KG
4. Water pressure: 0.5-3KG
5. Single applicable area: 50-200 square metres (within 3m of floor height)
6. Installation: connected to the compressed air and water, the humidifier with matching L-shaped bracket hanging up
7. Description: humidity requirements (such as 40-50% of the humidity) such conditions, need to match the humidity control box (not included) use
8. Material: spray pot: polyethylene PP; nozzle: 304 stainless steel
9. Size: about 30 x 10 x 8cm
10. Weight: about 900g
11. Note: only the humidifier, does not include other

Features:
1. To solve all kinds of industrial workshop humidity does not meet the standard problem, to meet the 40-70% RH conventional humidification requirements, eliminate static electricity
2. With very significant spray dust purification effect
3. High temperature season, play an obvious spray cooling effect, so that the human body feel cooler
4. After adding disinfectant solution, it can play the role of evenly spreading spray disinfection and odour purification
5. Visual pressure gauge regulator, independent manual switch valve, four-way dry fog nozzle design
6. Atomisation nozzle can be added to the universal joint (not included) to convert the nozzle direction angle

Technical note:
1. It is recommended that the water and gas supply install filters (not included), to avoid spraying the pollution of the workshop and nozzle blockage
2. Pipe can use PPR hot melt pipe, PVC water pipe, PU pipe, aluminium-plastic pipe, galvanized pipe, etc. (not included)
3. Environmentally friendly products, no consumable wearing parts